The maintenance of smart curtains is the key to ensuring their normal operation and extending their service life. Here are some key points of smart curtain maintenance:
First, clean regularly
1. Curtain fabric cleaning:
- Frequency: It is recommended to clean the curtain once every six months, but the specific frequency can be adjusted according to the degree of dirt and the use of the curtain environment.
- Method: When cleaning, the appropriate washing method should be selected according to the different fabric of the curtain. Fabrics that are easy to deform or shrink are recommended to be dry cleaned; Washable fabrics such as hemp can be wiped directly with water or washed by machine, but they should be dried naturally to avoid dehydration or drying resulting in deformation.
- Daily cleaning: Vacuum at least once a week, paying special attention to removing dust trapped in the curtain hanging track and rubber strip. If the vacuum cleaner cannot completely remove, use a dry cotton cloth gently wipe.
2. Track cleaning:
- Use a soft brush or vacuum cleaner to regularly remove dust and debris from the track and keep the track clean.
- Regularly add lubricant to the track to keep the lubrication of the electric curtain and ensure the smoothness and stability of the curtain opening and closing.
Second, prevent damage
1. Avoid liquid sputtering: In the process of use, the liquid should be avoided sputtering on the smart curtain, so as not to damage the electronic components and cause the curtain to fail. If you accidentally spill liquid, immediately use a clean rag to absorb the liquid and ensure that the curtain is thoroughly dry.
2. Sun protection: Prolonged exposure to sunlight may cause the fading and deformation of the curtain fabric. Therefore, direct sunlight should be avoided, which can be reduced by using shading curtains or drawing another layer of curtains.
3. Tap the curtain: Before the curtain is closed, gently pat the curtain several times to help dust and bacteria fall with the curtain, playing a certain cleaning effect.
Third, regular inspection and maintenance
1. Check the track and drive device: check the track and drive device of the curtain regularly for loosening and wear, if there is a problem, repair or replace the parts immediately, so as not to affect the use effect or even cause safety hazards.
2. Battery check: For the smart curtains using the remote control, the battery power of the remote control should be checked regularly to ensure that the battery power is sufficient to avoid problems in the control system.
3. Motor inspection: The motor inside the electric curtain also needs to be checked regularly, and if there is damage, it should be replaced in time to ensure that the electric curtain operates normally according to the set stroke.
Fourth, storage and protection
1. When not often used: if the electric curtain is not often used, it is best to completely close it to reduce the impact of dust, moisture and other adverse factors on the curtain.
2. Bare machine storage: If you need to remove the electric curtain for storage, it should be wiped clean first, then placed in a dry place, and sealed with plastic film to prevent rust and bending deformation. When stored, the pad should be a certain height from the ground and covered with waterproof material.
To sum up, the maintenance of smart curtains needs to consider cleaning, preventing damage, regular inspection and maintenance, storage and protection and other aspects. Through reasonable maintenance measures, you can ensure the normal operation of the smart curtain and extend its service life.
