The installation method of smart curtains mainly includes the following steps:
1. Draw lines for positioning and measure the dimensions: This is a key step in installing curtain tracks, and relevant dimensions need to be measured, such as fixing hole spacing and installation dimensions, to ensure accurate track installation.
2. Installing the curtain motor: Before installing the motor, it is necessary to rotate the lifting clip 90 degrees and connect it to the track. Then, install the self tapping screw on the top plate, and connect the smart curtain motor to the track for power on testing. It should be noted that the wiring should be connected in the correct way to avoid circuit faults.
3. Connect the motor and track together: When connecting the motor and track, place the curtain motor into the main transmission box, rotate it 90 degrees clockwise, and then push the insert into the extreme position of the transmission box, so that the motor and track can be perfectly connected.
4. Motor adjustment: After the connection between the motor and the track is completed, the motor needs to be adjusted. The specific method is to adjust the two knobs on the motor to make the gears on the motor enter a meshing state. Then cover the rear cover of the motor, tighten it with screws, and secure the locking plate.
In addition, when installing smart curtains, it is also necessary to pay attention to the following points:
1. Curtain box reserved width: The reserved width of the curtain box varies depending on the type of track. For example, the reserved width for a straight track (single track) should be ≥ 10cm, and the reserved width for a straight track (double track) should be ≥ 20cm. Therefore, when reserving curtain boxes, it is necessary to pay attention to whether the width meets the requirements.
2. Selection and installation of socket positions: For convenience of use, it is necessary to reserve curtain motor sockets. Usually, in order to reduce wiring, power sockets are reserved next to the curtain box or under the motor. As long as the motor power cord can reach or is not blocked by the motor.
3. Curtain length: When customizing curtains, it is necessary to consider that the installation track occupies a certain height to avoid the curtains being too long or too short.
Overall, the installation of smart curtains requires following the correct steps, while also paying attention to issues such as the reserved width of the curtain box, the selection and installation of socket positions, and the length of the curtains. If you are unsure how to install it, you can seek professional on-site service or refer to the product manual for operation.
